The Ingersoll Rand INSIGHT MTC (Multi-Tool Controller) platform provides a central interface for working with paired tools, tightening programs, accessories, and results.
Use this article to become familiar with the main screens and find the instructions for your next task, whether you are setting up a tool, creating a tightening program, or reviewing completed cycles.
Before You Begin
Confirm that:
- You have access to the controller with the permissions required for your task.
- You know which controller and tool you will be working with.
- You have identified the task you need to perform, such as pairing a tool, creating a program, or reviewing results.
- You have coordinated any configuration changes that could affect production.
For a new installation, start with Setting Up an MTC Controller for the First Time.
Interface note: Menu names, available settings, and screen layouts can vary with the controller hardware, installed software, connected tools, and licensed features. The demonstration video shows an earlier software version, so some screens may differ from your controller.
Video Demonstration
The demonstration provides a visual tour of the interface and several common workflows. Use the guide below to locate the relevant section.
Approximate video sections:
- 0:00–6:00: Pairing, tool settings, the Home screen, and menu navigation
- 6:00–14:00: Creating Psets and configuring tightening operations
- 14:00–17:00: Creating Jobs and assigning them to tools
- 17:00–21:30: Tool result displays and tightening traces
- 21:30–26:30: Accessories and barcode settings
- 26:30–30:30: Fieldbus configuration and tool-specific signal mapping
- 30:30–34:30: Cycle results and recorded tightening information
Video note: The closing portion discusses ordering and activation. For licensing requests, use the current Licensing Requests instructions.
Understanding Tools, Psets, and Jobs
Three connected elements organize work on the MTC platform:
- Tools are the individual tools paired with the controller.
- Psets contain the programmed tightening parameters and operations.
- Jobs organize the Psets used for an application, including their sequence and applicable batch requirements.
When configuring or reviewing information, check which tool is selected. A controller can manage multiple tools, and the settings or results displayed may apply to a particular tool.
For programming instructions, see Creating and Assigning Psets and Jobs Using an MTC Controller.
Navigating the Home Screen and Main Menu
The Home screen provides an overview of the tools associated with the controller. In the demonstration, multiple tool panels appear together, allowing the user to select a tool and open a more detailed view.
Use the main menu to move between programming, tool connections, accessories, results, settings, diagnostics, and maintenance functions.
Before making a change:
- Open the appropriate menu.
- Confirm the selected tool or device, where a selection is available.
- Review the existing configuration.
- Save changes using the screen’s save control, where provided.
Connecting and Managing Tools
Open Wireless Tools to view paired tools, access pairing functions, and open an individual tool’s settings.
The demonstration shows settings such as the tool name, IP address, and Job Selection mode. These settings help identify the tool and determine how it receives its Job selection.
For a new installation, start with Setting Up an MTC Controller for the First Time.
Use the following articles for specific connection tasks:
- Pairing QX Tools to Ingersoll Rand Cordless Controllers
- Replacing a QX Tool on an MTC Controller
- Updating Wireless Settings on an MTC Controller in Production
Important: Plan wireless configuration changes around production requirements. Follow the applicable procedure before changing settings that could interrupt tool communications.
Creating Tightening Programs
Use the Pset and Job menus to create and manage tightening programs.
The demonstration follows a connected workflow:
- Create a Pset.
- Select the applicable tool type and configure the tightening operation.
- Save the Pset.
- Create a Job and select its Psets.
- Configure the applicable sequence and batch settings.
- Save the Job and assign it to a compatible tool.
Values entered during the demonstration are examples. Use parameters approved for the actual fastening application.
For the written procedure, see Creating and Assigning Psets and Jobs Using an MTC Controller.
Reviewing Tightening Results and Traces
The controller provides views for reviewing tightening activity.
The demonstration shows an individual tool’s result display, including tightening values and trace graphs. It also shows the Cycle Result list for reviewing recorded cycles.
Use these views to:
- Review the displayed result for a selected tool.
- Examine available torque and angle information.
- Switch between available trace views.
- Locate recorded cycles and review their associated information.
Trace availability depends on the relevant capture settings and system configuration. Confirm that the correct tool and record are selected before interpreting the displayed data.
For the written procedure, see Reviewing Tightening Results and Traces on an MTC Controller.
Note: Results displayed on the Home screen and records in the Cycle Result list serve different purposes. Check the selected view when looking for a particular tightening cycle.
Working with Accessories and Barcode Scanners
The Accessories menu identifies connected devices and provides access to their available configuration options. The demonstration shows a USB barcode scanner being named and assigned.
Barcode settings determine how scanned information is used. Depending on the configuration, a barcode can be associated with tightening results or used to select a Job.
For scanner preparation, device assignment, and barcode-based Job selection, see Setting Up a Barcode Scanner on an MTC Controller.
Confirm the intended tool assignment when configuring accessories on a controller used with multiple tools.
Finding Communication and Integration Settings
The Settings menu provides access to communication functions supported by the installed system.
The demonstration includes the Fieldbus screen, where the user selects a fieldbus type and configures tool-specific input and output assignments. Other integration methods have their own setup requirements.
Use the procedure that matches your application:
- Setting Up Ethernet/IP on an Ingersoll Rand Cordless Controller
- Setting Up PROFINET on an MTC Controller
- Setting Up Open Protocol on an MTC Controller
- Setting Up EOR Data Out on an Ingersoll Rand Cordless Controller
- Setting Up ToolsNet on an MTC Controller
Coordinate integration changes with the personnel responsible for the connected PLC, manufacturing system, or network.
Locating Diagnostics, Logs, and Maintenance Functions
The controller menus also provide access to diagnostic tools, logs, and system-maintenance functions.
Use the relevant instructions when performing maintenance or software changes:
- Performing a Backup and Restore Using the MTC Controller
- Updating Firmware on an Ingersoll Rand Cordless Controller
- Updating QX Tool Firmware Using an Ingersoll Rand Cordless Controller
For the meaning of the controller’s physical front-panel indicators, see Status Icons on the MTC Controller Front Panel.
If you are converting a legacy QCX installation to the MTC platform, follow Upgrading QCX to the MTC Platform. That conversion has additional licensing and migration requirements.
When to Contact Technical Support
Contact Ingersoll Rand Technical Support if a required function is unavailable, the displayed configuration does not match the applicable instructions, or a connection or configuration issue remains unresolved.
Include the controller model, application version from the About screen, affected tool model, and a description or screenshot of the issue.
Manuals & Downloads
- Setting Up an MTC Controller and QX Tool for the First Time (PDF)
- Creating Psets and Jobs Using an MTC Controller (PDF)
- Pairing QX Tools to an MTC Controller (PDF)
- Backing Up and Restoring an MTC Controller (PDF)
- Setting Up a Barcode Scanner on an MTC Controller (PDF)
- Setting Up Ethernet/IP on an MTC Controller (PDF)
Need Help?
If assistance is needed in the product selection process, please contact Ingersoll Rand's Power Tool Technical Support Team through Submit a Request via our Help Center, email at IRToolHelp@irco.com, or call us at 800-TOOL-HLP (800-866-5457).
Comments
0 comments
Please sign in to leave a comment.