Setting up Ethernet IP on an Ingersoll Rand Cordless Controller

Objective

Outline the steps necessary to setup Ethernet IP on an Ingersoll Rand Cordless Controller.

Environment

 All users of Ingersoll Rand Cordless Controllers integrating with an Ethernet IP Master PLC. 

Procedure

Click to download and view setup instructions for an MTC controller

Click to download and view setup instructions for a QCX 1:1 controller

Notes

Download the EDS file.  

Download the spreadsheet showing the PCM Bit Mapping.

The PLC and controller must be on similar timing.  The INSIGHT controller expects data no faster than every 50 ms.  The customer PLC should have cycle rates no faster than 100 ms or communications issues could arise.