The Ingersoll Rand MTC (Multi-Tool Controller) platform provides screens for reviewing a tool’s displayed tightening results, examining available traces, and finding recorded cycles.
Use this article to review individual tool results and locate historical records by tool, Job, Pset, date, or result.
Before You Begin
Confirm that:
- You have access to the controller with the permissions required to review results.
- You know which tool, Job, or Pset you need to investigate.
- The tool has completed the tightening cycles you want to review.
- Trace capture was configured if you need tightening curves.
- You have the application’s approved acceptance criteria available.
For instructions on configuring Psets, Jobs, and trace settings, see Creating a Pset and Job Using an MTC Controller.
Interface note: Menu names, available fields, and screen layouts can vary with the controller software, tool type, and configuration. The demonstration video shows an earlier software version.
Understanding the Result Views
The controller provides two useful starting points:
- Individual tool view: Review the displayed tightening result and available trace for a selected tool.
- Cycle Result list: Find and compare recorded tightening cycles.
Check the selected tool and record before interpreting any values. In a multi-tool installation, different tools can be running different Jobs.
Important: A passing result indicates that the controller evaluated the cycle against the configured criteria. Confirm that those criteria match the approved application requirements before using the result for a quality decision.
Video Demonstration
Note: The video shows an earlier software version. Screens and available options may differ from the installed version.
Use these approximate starting points:
- 18:30–21:30: Individual tool results and trace views
- 30:30–34:15: Historical cycle results, filters, and displayed result fields
Procedure
1. Open an Individual Tool’s Result View
- Open the Home screen.
- Identify the tool you want to review.
- Use that tool panel’s expand control to open its detailed view.
- Confirm the selected tool and displayed Job.
- Review the available result information.
The demonstration shows an individual tool view containing the Pset name, tightening-step information, angle and torque results, and batch progression.
The displayed result can change as additional cycles are completed. Use the Cycle Result list when you need to locate a specific historical cycle.
2. Review the Displayed Tightening Result
- Check the result status.
- Review the displayed torque and angle values, including their units.
- Compare the values with the applicable targets and limits.
- Check the Pset or step associated with the result.
- Review batch progression where applicable.
A single tightening-cycle result and completion of an entire Job are different checks. Confirm that the required sequence and batch have been completed before treating the Job as finished.
3. Examine the Available Trace
- Locate the graph beneath the tightening result.
- Open the trace-view dropdown.
- Select an available view, such as Torque vs Angle or Torque vs Time.
- Check the horizontal and vertical axis labels.
- Review the curve alongside the corresponding tightening values and application requirements.
A torque-versus-angle graph shows how torque changes as rotation progresses. A torque-versus-time graph shows how torque changes over the recorded time interval.
Note: A missing or blank graph does not by itself establish that the tightening cycle failed. Trace availability depends on capture settings, transfer settings, and whether trace data is available for that cycle.
To review trace configuration, follow the Pset instructions in Creating a Pset and Job Using an MTC Controller.
4. Open the Historical Cycle Result List
- Open the main menu.
- Expand Result.
- Select Cycle Result.
- Review the recorded cycles.
- Use the page controls to move through available records.
- Scroll horizontally to view additional columns.
The demonstration shows columns for information such as Job name, cycle numbers, tool serial number, torque result, and angle result. Additional columns include trace availability and tool name.
Use the identifying fields together to distinguish the cycle you need from other records.
5. Filter the Recorded Cycles
- Select the Filter control on the Cycle Result screen.
- Enter or select the criteria needed to find the records.
- Select Apply.
- Review the filtered list.
- Adjust or clear the filters when changing the scope of your review.
The demonstrated filter includes:
- Job Name
- Pset Name
- Start Date and End Date
- Select Operator
- Result
- Tool Name
- Identifier
For example, select the tool and Pset, narrow the date range, and choose Fail to focus on unsuccessful cycles for that operation.
If no records appear, check the active filters before concluding that data is missing.
6. Review Additional Result Fields
- Open the EOR Parameters control on the Cycle Result screen.
- Review the available result-field selections.
- Select the fields relevant to your investigation.
- Select Apply.
- Scroll across the list as needed to review those fields.
The demonstration includes selectable fields such as Trace Available, Timestamp, and Fastening Time. Available fields can vary with the system and tool.
Use Trace Available, where provided, to help determine whether a recorded cycle has associated trace data. Trace-capture settings control what is recorded; changing the displayed columns does not create a trace for an earlier cycle.
7. Confirm the Record Before Taking Action
Before using a result for troubleshooting or a quality decision, confirm:
- The correct tool is identified.
- The Job and Pset match the operation being reviewed.
- The timestamp or cycle identifiers match the event.
- Torque and angle units are understood.
- The relevant result fields and trace belong to the cycle being investigated.
Follow the approved quality or rework process for failed or uncertain results. Do not change Pset limits simply to make an unsuccessful result appear acceptable.
Expected Results
After completing this procedure, you should be able to:
- Open a selected tool’s detailed result view.
- Review the displayed tightening status and values.
- Switch between available trace views.
- Locate historical cycles using filters.
- Display additional result fields and check trace availability.
If Results or Traces Are Missing
Start by checking the selected tool, active filters, and date range. For trace concerns, also review the Pset’s trace-capture settings.
If results are expected in an external system, verify that system’s communication configuration separately. See Setting Up EOR Data Out on an Ingersoll Rand Cordless Controller.
For barcode identification concerns, see Setting Up a Barcode Scanner on an MTC Controller.
Software-specific note: The 100.2.0.32 / 300.2.0.32 release notes identify a known issue involving invalid trace data for the first cycle after tool power-up or pairing. Consult the release notes applicable to the installed software before diagnosing a trace concern.
When to Contact Technical Support
Contact Ingersoll Rand Technical Support if expected cycle records remain unavailable, traces are repeatedly missing despite the required capture settings, or displayed information cannot be reconciled with the fastening operation.
Include:
- Controller model and application version
- Tool model and serial number
- Job and Pset names
- Approximate event date and time
- Relevant cycle identifiers
- Screenshots of the result, filters, or trace concern
Submit a Technical Support Request
Manuals & Downloads
- Setting Up an MTC Controller and QX Tool for the First Time (PDF)
- Creating Psets and Jobs Using an MTC Controller (PDF)
- Pairing QX Tools to an MTC Controller (PDF)
- Backing Up and Restoring an MTC Controller (PDF)
- Setting Up a Barcode Scanner on an MTC Controller (PDF)
- Setting Up Ethernet/IP on an MTC Controller (PDF)
Need Help?
If assistance is needed in the product selection process, please contact Ingersoll Rand's Power Tool Technical Support Team through Submit a Request via our Help Center, email at IRToolHelp@irco.com, or call us at 800-TOOL-HLP (800-866-5457).
Comments
0 comments
Please sign in to leave a comment.