[FAQ] - Tool Hanger for 2135 Series Composite Housing Impacts

There is no hanger available for the 2235 or 2326 Series. 

However, a hanger/bail is available that enables 2131 and 2135 Series 1/2" drive composite housing impact wrenches to be suspended from a tool balancer. Please refer to the images below.

The part number for the hanger is 2131-366, and it can be installed using the original hammer case bolts.

This hanger is compatible with:- All 2131 Series Impacts- All 2135 Series Impacts- 2350XPTL-2- EB2125X

*NOTE* This hanger is NOT compatible with the 2235/2236 Series, 15QMAX, 35MAX, or any Ingersoll Rand cordless impacts.